I am actually working in the shop, a lot lately. So to break the hectic pace of the days I like to goof off and make something fun. 15 minuets here and there over a couple of days has added up to about 2 hours or so for this little guy. The handle is hickory and head is from a #20 nail. Using a bench grinder to rough out the head then finish grind with a Dremel and diamond bits. If you look close at the second picture and click on it you'll see the handle passes through an oblong hole that took the life of 2 good 1/16" diamond bits. What a shame cut down so early with more to do.